Friday, October 18, 2019
Challenges of ERP adoptions and critical success factors Essay
Challenges of ERP adoptions and critical success factors - Essay Example ber of factors such as enhancing the ability so as to compete on the global platform, excessive pressure from increased competition so as to become the low cost producer and increasing expectations in terms of revenue growth. In todayââ¬â¢s scenario of implementation as well as management of enterprise resource planning the most important aspect is that of critical success factors or CSF. There lies a strong correlation between the challenges or issues that are witnessed with the adoption of ERP technology with these critical success factors. The critical success factors can be stated as exemplars that enable the process improvement boundaries to be extended and even can be considered to be valuable if it is taken into consideration in each of the stages of the overall implementation process. The adoption of ERP into the system is dependent upon various critical success factors that are grouped into two major parts that are strategic and tactical factor. The support from the top management is very essential when the issue about the implementation of ERP system is taken into account. In any organization the rules and regulation are set forth by the top management of the system and the software adoption as well as execution is majorly dependent on the extended support that is provided by the top management. The critical success factors that are strategic by nature is related to the mission of the project, support given by the top management and in case of project scheduling it can be associated with outlining various actio n steps for individual in order to implement the project (Ziemba & ObÃ
âÃâ¦k, 2013, pp. 4-9). The tactical issues are needed to be considered when the next phase of project implementation takes place that is related to communicating with different users, adopting the necessary technology so as to support the system and hiring of business and technical professionals who would carry forward the implementation process. The critical success factors of ERP
Thursday, October 17, 2019
Explain a Marketing Concept Essay Example | Topics and Well Written Essays - 250 words
Explain a Marketing Concept - Essay Example Customers often do not and cannot describe their needs precisely and it is a marketers job to find out the same. Gillette has been in the business of safety razors ever since 1904. It has been constantly innovating and offering new products as per the market needs. In the late 1980s, companys sales were languishing and market share plummeting. Company was quick enough to realize this and in 1990 launched a product called Sensorââ¬â an advanced twin blade shaving system. It was designed to have a pivoting head equipped with moving blades so as to adjust with facial contours. This new offering facilitated closer and smooth shave and thereby Sensor became an instant success for it satisfied markets one of the niche area. It is not surprising that Sensor captured 15% market in the razor and blade segment. Subsequently, Gillette also introduced the ââ¬ËSensorExcelââ¬â¢ for women to cater exclusively the women shaving needs. The company continued to offer innovative products such as Gillette Mach3 Turbo, Gillette for Women Venus in the shaving segment year after year to meet the needs of t he ever expanding market. Pencil cell market is huge and usual complaint is a shorter life span of these cells needing replacement quite often. Gillette realizing this drawback of existing product lines introduced high-tech alkaline batteries called Duracell Ultra having a life span much larger than conventional batteries. Needless to say that this new offerings in the name of Duracell became an instant success in the market place for many home gadgets such as digital flash cameras, cell phones, watches. Thus, Gillette is the classic example that offers new products through innovation to fulfill the needs of the consumers and the companyââ¬â¢s continued business success proves that new offering to fulfill ever increasing consumer needs is the great marketing
ART IN THE NEWS PAPER Research Example | Topics and Well Written Essays - 750 words
ART IN THE NEWS - Research Paper Example Pachacutec reformed the city after he took over the throne in 1438 in which he built new streets as they appear today. The city resembles Puma and the Coricancha is located in the tail of the animal (News Central 2015). The city is the holiest in Incan according to myths related to the city. The temple was built around 1200 AD using the style of the Incas, which got many praises from Pedro Sarmiento Gamboa, an early Spanish historian. In his book, Sarmiento was overwhelmed by its evenness and beauty. The temple was between four main highways, connected to the four districts of the empire, and represented the importance of religion (News Central 2015). The temple was a symbol of unity and the cultural practices, which were diverse in the territory of the Incas. The temple provided housing for more than 4,000 priests and had captivating scenery especially the shadows cast by stones on the Andes Mountains. The temple had four main chambers with the dedication to the stars, the moon, thunder, and rainbows (News Central 2015). There was gold that filled the Coricancha and one of the chambers had a giant sun disc that reflected sunlight which provided light to the whole temple. The emperor used to sit in a sacred space, which was illuminated by the sun during the summer solstice. Cusco played a very important role for the success of the empire although there were disputes over the next Inca. There was an epidemic of smallpox brought by the European explorers in the 1530s, which resulted to chaos in the empire (The Guardian 2015). Francisco Pizarro of Spanish captured the empire during the chaos and demolished most of the Coricancha, melted all the gold sculptures and sent them to Spain. Afterwards, they put up a Cathedral on the same site, which was later destroyed by the earthquake. However, the foundations of the temple were left intact and today it attracts many people as tourists. Th e
Wednesday, October 16, 2019
Explain a Marketing Concept Essay Example | Topics and Well Written Essays - 250 words
Explain a Marketing Concept - Essay Example Customers often do not and cannot describe their needs precisely and it is a marketers job to find out the same. Gillette has been in the business of safety razors ever since 1904. It has been constantly innovating and offering new products as per the market needs. In the late 1980s, companys sales were languishing and market share plummeting. Company was quick enough to realize this and in 1990 launched a product called Sensorââ¬â an advanced twin blade shaving system. It was designed to have a pivoting head equipped with moving blades so as to adjust with facial contours. This new offering facilitated closer and smooth shave and thereby Sensor became an instant success for it satisfied markets one of the niche area. It is not surprising that Sensor captured 15% market in the razor and blade segment. Subsequently, Gillette also introduced the ââ¬ËSensorExcelââ¬â¢ for women to cater exclusively the women shaving needs. The company continued to offer innovative products such as Gillette Mach3 Turbo, Gillette for Women Venus in the shaving segment year after year to meet the needs of t he ever expanding market. Pencil cell market is huge and usual complaint is a shorter life span of these cells needing replacement quite often. Gillette realizing this drawback of existing product lines introduced high-tech alkaline batteries called Duracell Ultra having a life span much larger than conventional batteries. Needless to say that this new offerings in the name of Duracell became an instant success in the market place for many home gadgets such as digital flash cameras, cell phones, watches. Thus, Gillette is the classic example that offers new products through innovation to fulfill the needs of the consumers and the companyââ¬â¢s continued business success proves that new offering to fulfill ever increasing consumer needs is the great marketing
Tuesday, October 15, 2019
The Great Gatsby - Element of Fiction - The Plot Essay
The Great Gatsby - Element of Fiction - The Plot - Essay Example Nick Carraway, Jay Gatsby, and Daisy Buchanan. She is Nickââ¬â¢s cousin (Fitzgerald 2). Tom Buchanan, Daisyââ¬â¢s husband and Nickââ¬â¢s classmate. Jordan Baker a long time friend to the Buchananââ¬â¢s family (Gross & Jean 29). Myrtle Wilson Tomââ¬â¢s mistress. The final major character is George B. Wilson Myrtleââ¬â¢s husband. Nick then had moved to the West Egg. Daisy, Nickââ¬â¢s cousin is married to Tom (Gross & Jean 43). They live close to New York City in a town known as East Egg. Tom is tremendously wealthy. For this reason, Daisy had married him (Fitzgerald 12). Nick regularly visits his cousinââ¬â¢s family in East Egg. Where Nick lives, he is neighbored by a wealthy man known as Gatsby. Gatsby throws parties weekly. Nick visits Daisy one evening at her home for dinner. He is introduced to a beautiful girl Jordan. Jordan and Nick start up a romantic relationship (Fitzgerald 25). Through Jordan, Nick learns that Tom has an affair with Myrtle Wilson. Myrtle is a wife to a gas station owner (Gross & Jean 46). One evening, Tom invites Nick to a party in New York. He also invites his mistress Myrtle Tom picks Myrtle on his way to the party. Myrtle gets drunk to uncontrollable levels, while at the party (Fitzgerald 30). She is, therefore, not keen on what she says. She makes fun of Daisy. This hugely angers Nick. For this reason, Nick beats her up (Gross & Jean 51). Actually breaks her nose. Gatsby had fallen in love with Daisy five years ago. Then he was a poor military man. Daisy had opted to marry Tom who is richer (Fitzgerald 45). This was after Gatsby had gone to participate in the war. Gatsby was so determined (Gross & Jean 57). He wanted t get rich. This would help him win Daisy back. This had challenged Gatsby to gain wealth rapidly. He did this through illegal deals of selling prohibited alcohol (Gross & Jean 63). He had then bought the mansion. This was to be close enough to daisy. Gatsby has gained immense wealth (Fitzgerald 47). He plans on
Monday, October 14, 2019
The Factors Influencing The Built Environment
The Factors Influencing The Built Environment Introduction The proposal assumes the role of a developer presenting to the client. This will help the client to understand the factors influencing the Built Environment (Moxon Street) site. The site would be developed for a Student Accommodation. Though details of the site are not given in the report but an overview of all the factors that would affect the site development, the techniques used, the precautions ought to be taken, etc. It is a general description of how a site will be developed keeping in mind the health, safety welfare and the environmental implications from the development of the site. Section 3 In a built environment it is necessary for the Designer to reduce the health risks that occur from the construction work and also to provide for the safety and welfare to the workers. So Health, Safety and Welfare play an important in the design process. It can be further divided into stages. The Design process which is a benchmark to identify the health risks that arises from the design as well as eliminate the hazardous to a reasonable extent. An onsite register can also be maintained in this regard to show that we have to consider the onsite risks. It would be mandatory for the chemicals contained in the product to be registered under REACH. For Health Hazard the services of a CDM coordinator will be hired and certain components would be assembled off site which would reduce the health hazard on site. The project risk review gateways will be linked to RIBA at the plan of works stages. There is a need for systematic risk assessment and solution will be assessed on the basis of risk control hierarchy. There would be a Red-Amber-Green list which can help the designer to identify and also to negate the hazards and to control risks as far as possible. The Development will have a negative impact on the environment. The Council stipulates that necessary Environment Impact Assessment and Environmental Performance Statement should be part of the development plans. The design should have provisions for natural sunlight, ventilation of air, energy consumption, etc. This should be able to reduce air and noise pollution. This will help the developer to create goodwill for himself as well. There will be ultra low flush toilet which would reduce the use of water. There are certain Risks Assessments which are to be carried out for the health and safety of the employees on site. They would be in respect of- As per the Control of Substance hazardous to health regulation precaution would be taken by a systematic approach. The services of an Agency would be hired for workplace monitoring for harmful dust, vapours, fumes and gases. This would be done as per the Workplace Exposure Limits given by E40. European Union Noise at work regulation would also be considered as per the guidelines- The 1st and 2nd Action Levels are 80dB(A) and 85dB(A) respectively. 1st and 2nd Peak Action Levels of 135dB(C) and 137dB(C) Peak respectively. A Maximum Exposure Level Limit of 87dB(A) and 140dB(C) Peak at the ear will be introduced which includes any hearing protection. There would be due consideration given to Fire Risk assessment of Catering Extract Systems with regards to the guidelines- BSRIA Fire Risk Assessment Catering Extract Ventilation Regulatory Reform Fire Safety Order (RRFSO) 2005 HVCA DW172 Specification for Kitchen Ventilation Systems. Indoor Air Quality Sick Building Syndrome would be identified as this will affect the health of the occupants of the building. This complains could arise from a particular room or floor but could have a lasting impact on all the occupants. Odour Threshold analysis would also be conducted. This is relating to the strange smell i.e., presence of volatile organic compounds in the building that could affect the health to the occupants. The majority of these volatile organic compounds are present in very low concentrations i.e. 0.1-1ppb (parts per billion). Legionella risk Assessments and Asbestos Identification Surveys would be conducted as well. This would be in accordance with the Approved Code of Practice and Guidance L8, Legionnaires disease Approach There would be a Multi discipline approach taken in the risk management in the design process. This will be fruitful because of the vast experience of the Architect, Consultant, Engineer; etc would be integrated right from the design process. Design Implication This all will help us to have a safe and a sound design which would eliminate the hazards to the health and safety of the workers as well as of the occupants. This will also help us to reduce the environmental impact of the built environment. Primary Services Utilities It is necessary to accommodate these services in the early stages of the design process. There should be early checking of availability of these services Early decision on intended location of such services on the site This will ensure that there is a proper plan in place and will also help us to avoid complications in the future. Provisions should be made for- Telecommunications Gas Water Electricity Sewage services If there are issues with the availability of any of these services than a decision can be taken at the early stages of the design process. The Location of these services would be depended as per the acceptable framework provided by RIBA Plan of Work 2007. This will assist the design team to plan, coordinate and also to have a definite approach to the various services. Entry to the building would be given from all the four sides with the main entrance from the front of the building. There can also be distribution and scaling down of different services done by the Designers to meet the needs of our development. The provisions for accessibility and the maintenance of these services would be done at the early stages of the design process. We would hire competent staff which would look after the maintenance of these services with an access given to them on each floor for easy maintenance and repair. The environmental implications of these services would be- Create a sustainable environment for the communities Protect public health by giving safe drinking water, effective sanitation services, etc Safely recycling waste Comply fully with all the environmental legislation These above precautions and approaches will help us to achieve effective management of services with regular maintenance and also providing with a safe environment for the community. The Water extraction will be done by the he liquid ring vacuum pump contains a twin start helical rotor mounted eccentrically in a cylindrical pump casing and is designed to pump liquids or combinations of liquid, air and fine solids through long suction lines, generating suction lifts to up to 8.5m. For the waste Disposal there will be a Site Waste Management Plan (SWMP) in line with the DTI Code of Practice and associated good practice guidance. On completion the new building should be subject to Post Occupancy evaluation. Global Warning The building designs will be based on the UKCIP medium high emission scenario rather than that which is based on historical data. UKCIP predicted that the average temperature in UK will rise by 3.5 degree by 2080, therefore a mixed mode ventilation stems incorporating the passive and mechanical ventilation coupled with high thermal mass and complete solar shading are likely to cope with the effects of the climate change. Mayor of London commissioned a report stating that London is the most susceptible to flooding than any other urban area in the UK. The site is not in the Zone 3 established by the Westminster Council that specifies areas the areas affected during floods. In order to minimise the energy demand of the building we must increase the efficiency in the building envelope, using high efficiency windows, insulation in walls, ceilings and floors will be used. Passive solar building design could also be used. This will minimise energy demand. In order to control emission to water point of water treatment would be used. This improves the quality of water and also reduces the amount of water in circulation. Non-sewage would be used on site which would minimize demand on the local authority. There would be a good thermal insulation system in place this would minimise the emission to air. The ex filtration of warm air would result for 30% of the heat loss through a buildings envelope. A air leakage test would be carried out as well. Renewable Energy Issues Technical- The site will have a- Solar energy technology Heat pumps Energy from waste Co-generation This will help to reduce the impact on the environment. Economic- Initially the cost of the machines would be higher than the conventional equipments but over a period of time there would be a lot of savings due to a decrease in the bills. Social- This will have a positive impact on the occupants and the community. The carbon and the fuel emission would be quiet low. This would sub dued the hazards caused to the health and safety of the people. Range of Sustainable construction technique includes- Wind Solar Wave Biogas Landfill gas Hydro Waste to Energy 84 KW wind generator Double exterior walls with foam insulation Radiant slab heat for excess energy storage Section 4 The Health and Safety at Work Act 1974 describes the risks associated with the construction industry and narrates the specific provision which ought to be taken to negate the danger. The CDM regulation 2007 encourages co ordination and co-operation among the various parties of the project. It works towards making health and safety an integral part of designing and construction. It recognises the hazards in the planning and construction stage of the project and helps to take corrective steps. The construction health, safety and welfare regulation 1996 are a set of rules to protect the health and safety of the people engaged on the site and the people who may be affected by the work. It is a leaflet which describes the regulation and precautions to be taken by the people on the site. The main focus of the Management of the Health and safety at works regulation 1999 is to reduce the damage on the site and to create a action plan for the emergencies. There is a need to comply with the specific regulation of the industry. Works at Heights Regulations 2005 is concerned with the injury that could occur to a employee as a result of a fall. It covers both the internal and the external areas of the building. There is present no height limit. It places duties on the persons who control the work on the site to take necessary care and precaution. Method Statement Site Foundation The site has a mixed structure type up to 30 metres. So mechanical handling is essential. There should be no public access until the construction work is complete. Adequate security is to be provided to see there is no theft or damage to the site. The site will be developed in two phases. Loading/Unloading of materials As the project is conducted in two phases here is sufficient space at the corner of the site for the loading and unloading of materials. This would also give rise to some risks but it would be handled by the experienced staff that operates the machines. Machines Non-maintenance of machine will pose a great threat to the workers engaged in site development. So a good maintenance schedule is needed to reduce the need of replacement. All machines should have the current safety inspection certificate and the person operating it should also be certified. Electrical Equipment There is a need to keep a check on the conditions of the equipments. Weather Condition When there are unsafe a situation arising from the weather conditions the authority is given to the site foreman to take the precaution which is deemed necessary. Individual Safety Clothing Individual safety clothing will be provided on site and it is necessary to wear them at all times. Safety Systems of Work It is divided into three parts It analyses the task at hand Hazards caused to health, safety and welfare Precautions to be taken to eliminate the hazards It is an extension of the Risk assessments and the method statement All this should take place from the planning stage, the design and also on the construction stage. (Example included in the appendix) Site Induction and Training It is the legal responsibility of the employer to provide induction and training relating to the hazards and risk associated to the health and safety of the employees and the contractors. It includes- The scope of work Amenities on the site such as toilet, water, etc Safety rules in place Safety procedures for high risk construction activity PPE required to be worn First aid arrangements on the site Good Site management It is necessary to hire Project Manager for a good site management. They coordinate all design and construction process. They assist the site from the development stage to the actual completion of the site. As the size of the project is reasonable there is a need to hire a Project Manager. Health and Safety Signage site safety signconstruction multi sign 1 Personal Protective Equipment Safety footwear Hard hats High visibility waist coats Goggles Life jackets Safety harness Insulated clothing for adverse climatic condition Mitts Gaiters Checklists is required for the safety of the employees on site It is necessary for-; Scaffolding Powered Access equipments Roof Work Hoists Cranes Fire Hazardous substance Noise, etc. Roles and Responsibility of the various parties under CDM 2007 Clients Competence of the contractors Suitable arrangements for the welfare facilities Provide pre construction information to the designers and contractors Planning Supervisor Assist the client Notify HSE Co ordinate health and safety in regards to design Ensure good communication on the site Prepare and update health and safety file Designers Reduce risk during design To check whether the CDM co coordinator is been appointed Make client aware of his duty Contractor Prepare and develop a written plan Site rules Ensure suitable welfare facilities are provided Ensure proper induction and training is provided to the workers Sub-contractor Manage and monitor own work and also of his workers Train own employees Provide them information Comply with the requirements of the part 4 of the regulations Users Report risks Check competence Co-operate with each other Health and safety Officer Check that health and safety arrangements are made Report any risks Impose fine if there are inadequate arrangements Supply Chain The materials are available in the free market however there are some materials which would be procured locally and some internationally through Wholesale Agency for Environmental friendly materials. International Procurement Reflective coatings and non structures Phase change material High efficiency insulation system Solar heaters Local Procurement Bricks Cement Concrete Pre cast structures Steel Electrical Fittings Elevators Furniture Wood for Flooring, etc. The access of the truck and the delivery of the material would be from the front entrance of the site with a possible provision at the back end of the site for the exit. A temporary warehouse would be constructed at the corner of the site depending on the construction phase. The handling of the material would be done by the employees who are trained beforehand. The eight rules of handling are included in the appendix Sustainability of resources Recycling facilities would be provided for paper and glass and with textile and plastics. Waste minimisation techniques will also be used to reduce waste and it will bifurcate into clean rubble, timber, general chemical waste, etc. Recycled and Eco friendly materials list is provided in the appendix Embodied energy issues We will try to include more renewable materials in the project which has lower embodied energy than non renewable materials. http://www.canadianarchitect.com/asf/perspectives_sustainibility/measures_of_sustainablity/images/images_optimized/eecontent.jpg Concrete produces 1 tonne of carbon dioxide for every tonne manufactured. Waste treatment and management techniques are important for bio degradability of materials at the end of their useful life. The techniques used are- Combustion or gasification Anaerobic digestion Mechanical treatment Biological treatment Modern Method of Construction It includes ready- made walls, floor and roof which are transported and then assembled on the site. They make construction faster. It also includes modular Kitchen, Bathroom, Furniture, etc which are factory fitted and help in reduction of project duration and also on site environmental hazards. The MMC houses are also energy efficient. Because only assembling is done on the site there are fewer accidents and produces less noise and dust. It also has a less impact on the local residents. References (The mentioned sites were accessed on 21st and 22nd of December 2009) Building a Better Quality of Life: a strategy for sustainable construction. DETR (2000) Sustainable Development Action Plan for Education and Skills. Department for Education and Skills (2003). Leadership in Energy and Environmental Design (LEED). US Green Building Council (2001). Environmental Performance Indicators for Sustainable Construction The Movement for Innovation (M4I) Sustainable Construction. Higher Education Partnership for Sustainability (HEPS). (2002) Building Research Establishment Environmental Assessment Method (BREEAM) Building Research Establishment (2002). http://www.cskills.org/supportbusiness/healthsafety/cdmregs/index.aspx http://www.btinternet.com/~kendalhang/hands/INDG220_HS_Construction.pdf http://www.netlawman.co.uk/info/health-safety-work-management.php http://www.admin.ox.ac.uk/safety/0505.shtml http://www.hsa.ie/eng/Sectors/Construction/Safe_System_of_Work_Plan_SSWP/ http://www.hydrostatic-testing-consultants.co.uk/Health%20and%20Safety%20Management%20System/ssp5wacg.htm http://www.bls.gov/oco/ocos005.htm http://www.healthyworkinglives.com/advice/minimising-workplace-risks/ppe.aspx#what http://www.healthandsafety.co.uk/sitesafchecklist.html http://www.processingtalk.com/news/tol/tol102.html http://www.hse.gov.uk/construction/cdm/summary.htm http://earth2tech.com/2009/11/02/venture-firm-nth-power-names-5-next-gen-green-building-materials-to-watch/ http://www.parliament.uk/documents/upload/postpn209.pdf http://www.slrconsulting.com/slr_waste_management.pdf http://www.healthyworkinglives.com/advice/minimising-workplace-risks/occupational-health-surveillance.aspx http://www.futuregate.co.uk/Written_Health_Safety_Policies.html http://www.chas.gov.uk/downloads/appendix2.doc http://www.hcibib.org/bibtoc.cgi?file=bibdata/CHI99-2.bibabstracts=true http://www.admin.cam.ac.uk/offices/environment/guidance/building.html http://portal.acm.org/citation.cfm?id=633292.633466 http://portal.acm.org/citation.cfm?id=632919 http://www.hcibib.org/bibtoc.cgi?file=bibdata/CHI00-2.bibabstracts=true http://www.noiseatwork.info/occupational_hygiene.html http://www.healthandsafetytips.co.uk/News%20Archive/April%202004%20News%20Archive/April%202004%20Consultation%20on%20New%20Noise%20at%20Work%20Regulations.htm http://www.eckeleurope.co.uk/ http://www.noiseatwork.info/monitoring_the_built_environment.html http://www.lda.gov.uk/server.php?show=ConWebDoc.2445viewPage=6 http://www.lda.gov.uk/server.php?show=ConWebDoc.2445setPaginate=No http://answers.yahoo.com/question/index?qid=20070705090343AAtqBfl http://www.admin.cam.ac.uk/offices/environment/guidance/building.html http://www.noiseatwork.info/monitoring_the_built_environment.html http://www.processingtalk.com/news/tol/tol102.html http://community.benchmarkemail.com/users/simonreed/newsletter/Civic-09-14-Editors-Newsletter-30th-July http://www.fife.gov.uk/atoz/index.cfm?fuseaction=advice.displayadviceid=2E4DDB61-FA29-ACC7-48F889880B70CA8D http://www.healthyworkinglives.com/resources/index.aspx http://www.healthyworkinglives.com/advice/minimising-workplace-risks/occupational-health-surveillance.aspx http://www.healthyworkinglives.com/advice/minimising-workplace-risks/occupational-health-surveillance.aspx http://www.healthscotland.com/advancedsearch/index.aspx http://chas.gov.uk/Downloads/Appendix2.dox http://www.worldpumps.com/view/3626/seaquarium-choose-liquivac-liquid-ring-pump/ http://www.filtsep.com/view/3626/seaquarium-choose-liquivac-liquid-ring-pump/ http://news.hse.gov.uk/lau/2009/09/17/health-risks-at-work-do-you-know-yours/ http://www.healthyworkinglives.com/advice/minimising-workplace-risks/HRatW.aspx http://www.masterytech.com/productpage.php?product_id=spmtlmpg http://www.mastery.com/productpage.php?product_id=spmtlmpg_htm http://www.training-classes.com/programs/00/19/1917_material_handling_safe_material_handling.php http://www.futuregate.co.uk/Written_Health_Safety_Policies.html
Sunday, October 13, 2019
Pretty Woman Vs. Pillow Talk :: essays research papers fc
The marriage plot has been quite prominent in the film industry over the past few decades. The plot that is characterized by its lead woman ââ¬Å"gettingâ⬠the lead man and vice versa, has contributed to such movie blockbusters as Pretty Woman and the classic film, Pillow Talk. While both films can be classifies as containing marriage plots, the films share other similarities as well. However, in regards to the marriage plot, Pretty Woman follows the pattern much more fluently and precisely that does Pillow Talk. à à à à à Both Julia Robertââ¬â¢s and Doris Dayââ¬â¢s characters, Vivian and Jan, respectively, are strong women in their films. They both contain quite a few characteristics such as boldness, confidence, and intelligence that make them very attractive and desirable to their male counterparts. While their professions are quite opposite, the women are similar in their personalities. Jan is an interior designer and her history with men is not troublesome or lacking, but like Vivian, the prostitute, she finds that men are sometimes after only one thing. I noticed that both women are extremely confident when it comes to dealing with men; they both know what they want and what the are looking for in a male companion. à à à à à The men in these two movies are quite similar as well. Both Rock Hudson and Richard Gere play two powerful men who are popular with the ladies. Although Hudsonââ¬â¢s career, a musician, is not typically ââ¬Å"powerfulâ⬠it does contain benefits and certain contacts that could be considered powerful. These two men both start out with the women practically chasing them. Vivian is paid to be Edwardââ¬â¢s (Gere) ââ¬Å"beck and callâ⬠girl, and does so willingly not just for the money, but because she is also mesmerized by his coyness, charm and good looks. Jan is attracted to Rex (Hudson) because he is also shy and coy and very handsome as well. Both women are interested in their counterparts for the particular reason that they are not men they typically meet. These men are respectful and somewhat quiet and shy. Each plot takes a turn towards the end of the movie when the women leave them, each for different reasons. Ironically and typical of the mar riage plot, it then become the man chasing the woman. He is to prove his worthiness to her and to dismiss her conclusion that he, in fact, is like all other men they have encountered.
Subscribe to:
Posts (Atom)